Hose And Fittings Norwesco Bolted Polypropylene Ball Valve Bulk Fill Nozzles | 1-1/2″ And 2″ Sizes

Norwesco Bolted Poly Ball Valve Bulk Fill Nozzles are manufactured from glass reinforced, chemically resistant polypropylene for strength and durability – they will never rust or corrode. These bolted ball valve fill nozzles are available in (2) sizes:

1.   1-1/2″ FPT valve with 1-1/2″ Nozzle

2.   2″ FPT valve with 2″ Nozzle

Valves are threaded on the bottom portion with FPT threads. For example, this allows you to install an insert fitting or a swivel connector into the valve to connect to a hose, for example.

The spout is also threaded into the body of the valve, which allows for removal. You can thread in other fittings of your choosing instead if required.

Features:

• Self-aligning ball rotates freely against Teflon seats.

• Unique body-to-flange ball valve design allows for low torque on/off operation.

• Viton O-ring stem seal and EPDM O-ring body seal.

• Pressure rated at 125 PSI @ 70°F.

• Tested by air pressure under water.

• 304 Stainless Steel nuts and bolts.

• FDA approved material.